(1).png)
BFK458-08E Coil 103V 8Nm
INTORQ BFK458-08E Coil 103VDC 8Nm
Electromagnetically released spring-applied brakes are used wherever masses in motion have to be decelerated as quickly as possible or where masses must be held in a defined position.
The main component of the modular system INTORQ BFK458 is the basic module E (adjustable braking torque).
The greatest degree of flexibility is achieved for a broad range of applications by combining basic modules E with specific modules.
Basic module E (adjustable braking torque): unscrewing the centrally located torque adjustment ring can reduce the spring force and, with it, the braking torque.
technical data:
- Manufacturer: Kendrion Intorq
- Type: INTORQ BFK458-08E
- Manufacturer's Part Number: 00519522
- Size: 08
- Design: E (with torque adjustment ring)
- Rated voltage: 103 VDC
- Characteristic torque: 3,5 - 8 Nm
- SVHC (REACH): 115-86-6
- Weight: 1,5 kg
| BFK458 Friction Plate
The friction plate is used if the counterfaces are smooth and machined, but is not suitable as a friction surface.
|
 |
|
For applications where no suitable counter friction surface is available.
|
 |
| BFK458 cover ring (seal)
The cover ring prevents dust, dirt, and moisture from out of or into the braking area.
|
 |
| BFK458 Hand Release used to manually release the brake (can be retrofitted) |
 |
| Screw kit for Intorq BFK458 mounting motor/friction plate |
 |
| Screw kit for Intorq BFK458 flange with a threaded hole |
|
| Screw kit for Intorq BFK458 flange with through-hole |
|
| BEG-142-270 Bridge Rectifier 4-pole Current supply for spring-applied brakes from AC mains |
 |
| BFK458 ALG ST Rotor noise-reduced A plastic sleeve reduces the noise between the rotor and hub |
 |
| BFK458 Rotor ALG WR Low-wear and noise-reduced
In addition, the low-wear rotor has a harder brake lining and can therefore perform more friction work before it has to be replaced.
|
|
|
BFK458 Rotor AL WR Low-wear |
 |