Lenze inverter 8400 TopLine 400V 37kW / 50HP

E84AVTCE3734VX0​ Lenze inverter 8400 TopLine 37kW / 50HP

The 8400 TopLine offers the maximum level of functionality and optimum drive behavior within the 8400 series, providing precisely tailored solutions.
Furthermore, TopLine represents a cost-effective solution for speed-controlled and position-controlled applications, as well as synchronized and positioning applications.
Cross communication between multiple TopLine units requires minimum wiring (3-core), as it runs via the separate axis bus. Alongside asynchronous motors, TopLine also supports dynamic synchronous motors via feedback.
Benefit from precisely tailored, cost-optimized Lenze drive units, consisting of prepared system cables, motors and gearboxes, feedback, brakes, fans and of course the 8400 TopLine.

Functions:

• DC brake function
• Flying restart circuit, PID controller
• Sensorless vector control
• "VFC eco" energy-saving function
• Sensorless control of synchronous motors (SLPSM)
• Brake management for brake control with a low rate of wear
• Logic functions, comparator, counter, arithmetic function
• Freely interconnectable function blocks
• Point-to-point positioning (with and without feedback)
• S-ramps for smooth acceleration and deceleration
• Servo control for synchronous and asynchronous motors
• Electrical shaft with adjustable ratio (electronic gearbox)
• Positioning sequence control
• KTY temperature sensor evaluation

Interfaces:

• Memory modules, L-force diagnostics interface
• DIP switch for CANopen (onboard)
• Integrated brake chopper
• External 24 V supply
• Digital inputs / outputs (8/4), analog inputs / outputs (2/2), relay
• Slot for EtherCAT, EtherNET/IP, PROFIBUS, or PROFINET communication module
• PTC/thermal contact input
• Resolver input and multiple encoder input
• Axis bus (for cross communication, synchronisation)

Technical Data:

• Manufacturer: Lenze
• Type: E84AVTCE3734VX0
• Series: 8400 TopLine
• Rated power: 37 [kW]/ 50 [HP]
• Rated mains voltage: 3/PE 400 [VAC]
• Output current:    76 [A]
• Output frequencies: 0-599 [Hz]
• Mounting location: Control cabinet
• Protection Rating: IP20
• Dimensions: h450 x w250x d265 [mm]
• Weight: 17,5 [kg]