E84AVHCE3034VB0 Lenze inverter 8400 HighLine 30kW / 40HP for AC 400V STO
The 8400 HighLine stands out from the 8400 range with its integrated pointto-point positioning. This allows up to 15 selectable target positions, including their travel profiles, to be saved in the inverter.
Depending on accuracy and dynamic requirements, you can choose to position with or without feedback.
The 8400 Highline is recommended for applications without feedback, such as dosing drives, palletisers or feed units, etc. Typical applications with feedback include: cross-cutters, rotary tables, lifts and hoists.
Functions
- DC brake function
- Flying restart circuit, PID controller
- Sensorless vector control
- "VFC eco" energy saving function
- Sensorless control of synchronous motors (SLPSM)
- Brake management for brake control with low rate of wear
- Logic functions, comparator, counter, arithmetic function
- Freely interconnectable function blocks
- Point-to-point positioning (with and without feedback)
- S-ramps for smooth acceleration and deceleration
- Servo control for asynchronous motors
- Overload current: 150 % (60 s) 200 % (3 s)
- Operating temperature -10 °C to +55 °C (derating above 45 °C: 2.5 %/K)
- Feedback systems HTL incremental encoder (200 kHz)
Interfaces:
- Memory modules, L-force diagnostics interface
- DIP switch for CANopen (on board)
- Integrated brake chopper
- External 24 V supply
- Digital inputs / outputs (7/4), analog inputs / outputs (2/2), relay
- Slot for EtherCAT, EtherNET/IP, PROFIBUS or PROFINET communication module
- PTC/thermal contact input
Technical data:
- Manufacturer: Lenze
- Rated power: 30 [kW] /40 [HP
- Rated mains voltage: 3/PE 400 [VAC]
- Output current: 61 [A]
- Output frequencies: 0-599 [Hz]
- Mounting location: control cabinet
- Safety engineering: STO "safe torque off"
- Type of supply concept: Single-axis(Mains supply)
- Dimensions: h450 x b250 x d265 [mm]
- Weight: 17,5 [kg]
(1).png)